Richard Trevithick – Page 2

Merthyr’s Ironmasters: Richard Crawshay

Courtesy of Cyfarthfa Castle Museum & Art Gallery

Richard Crawshay was born in 1739 in Normanton in the West Riding of Yorkshire, the first child of William Crawshay (1713–1766), a farmer, and his wife, Elizabeth (1714–1774), née Nicholson. He had three sisters. According to family tradition a bitter quarrel with his father led to the sixteen-year-old Crawshay setting out for London.

Initially starting work aged 16, he was apprenticed to a Mr Bickleworth of York Yard, Thames Street, selling flat irons in an iron warehouse, he eventually became, on Bickleworth’s retirement in 1763, sole proprietor of the business, and by the 1770s he had established himself as one of London’s leading iron merchants.

He married Mary Bourne in 1763 and they had a son William and three daughters, Anne, Elizabeth and Charlotte. Charlotte married Benjamin Hall, and became the mother of Benjamin Hall, 1st Baron Llanover.

By 1775, he was acting as the agent for Anthony Bacon, owner of Cyfarthfa Ironworks, for supplying iron cannon to the Board of Ordnance, and in 1777 he became a partner in the business. In 1786, following the death of Anthony Bacon, he took over the whole Cyfarthfa Ironworks, in partnership with William Stevens (a London merchant) and James Cockshutt. In May 1787 he took out a licence from Henry Cort for his puddling process, but the rolling mill needed was not completed until 1789. He solved the problems of the puddling process by using an iron plate for the furnace ceiling and sea-washed sand for the floor. In 1791 he terminated the partnership, which had made little profit. He continued the business alone, and had two blast furnaces, eight puddling furnaces, three melting fineries, three balling furnaces, and a rolling mill in 1794. A blast furnace was built by 1796, and a fourth in 1796. There were six by 1810. He thus developed Cyfarthfa into one of the most important ironworks in South Wales.

The Cyfarthfa Ironworks in the late 1700’s by William Pamplin – Richard Crawshay’s gardener. Courtesy of Cyfarthfa Castle Museum & Art Gallery

Crawshay was very ambitious and imperious in manner, being called ‘The Tyrant’ by some, but was without social pretension. He was active in protecting the interests of the iron trade and was a major promoter of the Glamorganshire Canal which immensely improved transport of iron to Cardiff docks.

In 1804 Samuel Homfray the proprietor of the Penydarren Ironworks made a wager with Richard Crawshay of 500 guineas that Richard Trevithick’s steam locomotive could haul 10 tons of iron along the Merthyr Tramroad from Penydarren to Abercynon. Crawshay lost the bet when Trevithick’s became the first to haul wagons along a “smooth” iron road using adhesive weight alone.

At his death in 1810, Crawshay’s estate was worth £1.5 million. In his will he left three-eighths of the Ironworks to his son William Crawshay, three-eighths to his son-in-law Benjamin Hall and two-eighths to his nephew Joseph Bailey.

An Interesting Find

by Ann Lewis

Tying in with the previous couple of posts, local historian Ann Lewis, has provided the following.

In the 1970’s, Vince Harris, the founder and first Chairman of the Merthyr Tydfil Historical Society gave me an old coin and a slip of paper with the details. Below is a photograph of the coin, and a transcription of the explanation.

This old 1806 George III half-penny was found in the ruins of the old Penydarren Ironworks’ blast furnaces in 1969.

This find is of particular interest to the history of the invention of the first steam locomotive to run on rails carrying passengers and goods.

The locomotive, invented by Richard Trevithick, ran very successfully from Penydarren to Abercynon Basin on 21 February 1804 – 21 years before the ‘Locomotion’ built by George Stephenson which ran in 1825 – and that even had to run on rails rolled at either Penydarren or Dowlais. Also, Trevithick’s Engine didn’t run over the Minister to the Board of Trade, or anyone else for that matter, on its trial run…..unlike Stephenson’s!!!

The 1806 half-penny is reputed to be among the first coins minted by Boulton & Watt on the first presses worked by steam, and is in excellent condition. One of the half-pennies that was struck in the 1970’s at the Royal Mint in Llantrisant is shown in comparison with the old one.

Merthyr’s Ironmasters: Samuel Homfray

Following on from the previous article, here is a bit more about Samuel Homfray in the first instalment of another new (hopefully) regular feature.

Samuel Homfray with Penydarren Ironworks in the background

Samuel Homfray was born in 1762, the fifth son of Francis Homfray and his second wife Jane. Francis Homfray (1725-1798) had been born into a successful industrial family, his father (also called Francis) had made his fortune in the iron industry at Coalbrookdale in Staffordshire. In 1749 Francis Homfray and Richard Jordan, also of Staffordshire, leased a water corn grist mill called Velin Griffith and a forge in the parish of Whitchurch, and in September 1782, he approached Anthony Bacon, owner of Cyfarthfa Ironworks, and leased the cannon foundry at the works to manufacture weapons and ammunitions.

In 1784 Homfray complained that he was not receiving sufficient metal and tapped Bacon’s furnace at Cyfarthfa. Francis Homfray worked the forge and mill until March 1786. However, after a disagreement with Bacon over the supply of iron, he gave up the lease of the Cyfarthfa property.

Francis encouraged two of his sons – Samuel and his older brother Jeremiah to lease land at Penydarren, next to the Morlais Brook and build an ironworks. After years of fierce competition with the Dowlais and Cyfarthfa Ironworks, they began to prosper. Samuel took over as proprietor of the Penydarren works, while Jeremiah moved to Ebbw Vale.

Samuel was one of the chief promoters of the Glamorganshire Canal, which opened in 1795 and cost £103,000, of which he subscribed £40,000 and which enabled the transporting of heavy manufactured iron to Cardiff docks. In 1804 Samuel won a 1000 guineas wager with Richard Crawshay as to which of them could first build a steam locomotive for use in their works. Homfray employed Richard Trevithick for this purpose and his locomotive won the bet, hauling five wagons, carrying ten tons of iron and seventy men, at a speed of five miles an hour.

In 1800, Samuel married Jane Morgan, daughter of Sir Charles Gould Morgan, 1st Baronet of Tredegar House, and thus obtained a favorable lease of mineral land at Tredegar, where he established the Tredegar Ironworks.

In 1813 he left the Penydarren Iron Company to concentrate his resources on developing the Tredegar Ironworks. Handicapped at Penydarren by a shortage of coal on the property, he faced no such problems when he built his new works. By 1823 Tredegar had five furnaces in blast, producing over 16,000 tons of iron each year.

Homfray’s connection with Penydarren was re-established in 1817 when his daughter Amelia married one of the works’ new owners, William Thompson.

In 1813 he was appointed High Sheriff of Monmouthshire and, having unsuccessfully standing as a candidate for a seat in Parliament for Brecknock in 1806, he was elected as Member of Parliament for the Borough of Stafford in 1818.

He relinquished his seat two years later, and he died on 22 May 1822 in London and was buried at Bassaleg.

Richard Trevithick – part 2

John Simkin’s article about Richard Trevithick continued from the previous post…

Trevithick was now employed by Christopher Blackett, who owned the Wylam Colliery in Northumberland. A five-mile wooden wagonway had been built in 1748 to take the coal from Wylam to the River Tyne. Blackett wanted a locomotive that would replace the use of horse-drawn coal wagons. The Wylam locomotive was built but weighing five tons, it was too heavy for Blackett’s wooden wagonway.

Trevithick returned to Cornwall and after further experiments developed a new locomotive he called Catch Me Who Can. In the summer of 1808 Trevithick erected a circular railway in Euston Square and during the months of July and August people could ride on his locomotive on the payment of one shilling. Trevithick had plenty of volunteers for his locomotive that reached speeds of 12 mph (19 kph) but once again the rails broke and he was forced to bring the experiment to an end.

Without financial backing, Richard Trevithick had to abandon his plans to develop a steam locomotive. Trevithick now found work with a company who paid him to develop a steam dredger to lift waste from the bottom of the Thames. He was paid by results, receiving sixpence for every ton lifted from the river.

Trevithick found it difficult to make money from his steam dredger and in 1816 he accepted an offer to work as an engineer in a silver mine in Peru. After some early difficulties, Trevithick’s steam-engines were very successful and he was able to use his profits to acquire his own silver mines. However, in 1826 war broke out and Trevithick was forced to flee and leave behind his steam-engines and silver mines. After a unsuccessful spell in Costa Rica, Trevithick moved to Colombia, where he met Robert Stephenson, who was building a railway in that country. Stephenson generously gave Trevithick the money to pay for his journey back to England.

Although inventors such as George Stephenson argued that Trevithick’s early experiments were vital to the development of locomotives, in February 1828, the House of Commons rejected a petition suggesting that he should receive a government pension. Trevithick continued to experiment with new ideas. This included the propulsion of steamboats by means of a spiral wheel at the stern, an improved marine boiler, a new recoil gun-carriage and apparatus for heating apartments. Another scheme was the building of a 1,000 feet cast-iron column to commemorate the 1832 Reform Act.

All these schemes failed to receive financial support and Richard Trevithick died in extreme poverty at the Bull Inn, Dartford, on 22nd April, 1833. As he left no money for his burial, he faced the prospect of a pauper’s funeral. However, when a group of local factory workers heard the news, they raised enough money to provide a decent funeral and he was buried in Dartford churchyard.

To read more of John Simkin’s excellent essays, please visit:
http://spartacus-educational.com

Richard Trevithick – part 1

courtesy of John Simkin

Richard Trevithick, was born in Illogan, Cornwall, in 1771. Richard was educated at Camborne School but he was more interested in sport than academic learning. Trevithick was six feet two inches high and was known as the Cornish giant. He was very strong lad and by the age of eighteen he could throw sledge hammers over the tops of engine houses and write his name on a beam six feet from the floor with half a hundredweight hanging from his thumb. Trevithick also had the reputation of being one of the best wrestlers in Cornwall.

Trevithick went to work with his father at Wheal Treasury mine and soon revealed an aptitude for engineering. After making improvements to the Bull Steam Engine, Trevithick was promoted to engineer of the Ding Dong mine at Penzance. While at the Ding Dong mine he developed a successful high-pressure engine that was soon in great demand in Cornwall and South Wales for raising the ore and refuse from mines.

Trevithick also began experimenting with the idea of producing a steam locomotive. At first he concentrating on making a miniature locomotive and by 1796 had produced one that worked. The boiler and engine were in one piece; hot water was put into the boiler and a redhot iron was inserted into a tube underneath; thus causing steam to be raised and the engine set in motion.

Richard Trevithick now attempted to produce a much larger steam road locomotive and on Christmas Eve, 1801, it used it to take seven friends on a short journey. The locomotive’s principle features were a cylindrical horizontal boiler and a single horizontal cylinder let into it. The piston, propelled back and forth in the cylinder by pressure of steam, was linked by piston rod and connecting rod to a crankshaft bearing a large flywheel. Trevithick’s locomotive became known as the Puffing Devil but it could only go on short journeys as he was unable to find a way of keeping up the steam for any length of time.

Despite these early problems, Trevithick travelled to London where he showed several leading scientists, including Humphrey Davy, what he had invented. James Watt had been considering using this method to power a locomotive but had rejected the idea as too risky. Watt argued that the use of steam at high temperature, would result in dangerous explosions. Trevithick was later to accuse Watt and his partner, Matthew Boulton, of using their influence to persuade Parliament to pass a bill banning his experiments with steam locomotives.

In 1803 a company called Vivian & West, agreed to finance Trevithick’s experiments. Richard Trevithick exhibited his new locomotive in London. However, after a couple of days the locomotive encountered serious problems that prevented it pulling a carriage. Vivian & West were disappointed with Trevithick’s lack of practical success and they withdrew from the project.

Richard Trevithick soon found another sponsor in Samuel Homfray, the owner of the Penydarren Ironworks in Merthyr Tydfil.

Penydarren Ironworks. Photo courtesy of http://www.alangeorge.co.uk/index.htm

In February 1804, Trevithick produced the world’s first steam engine to run successfully on rails. The locomotive, with its single vertical cylinder, 8 foot flywheel and long piston-rod, managed to haul ten tons of iron, seventy passengers and five wagons from the ironworks at Penydarren to the Merthyr-Cardiff Canal. During the nine mile journey the Penydarren locomotive reached speeds of nearly five miles an hour. Trevithick’s locomotive employed the very important principle of turning the exhaust steam up the chimney, so producing a draft which drew the hot gases from the fire more powerfully through the boiler.

A model of Trevithick’s Penydarren Locomotive at Cyfarthfa Museum. Photo courtesy of http://www.alangeorge.co.uk/index.htm

Trevithick’s Penydarren locomotive only made three journeys. Each time the seven-ton steam engine broke the cast iron rails. Samuel Homfray came to the conclusion that Trevithick’s invention was unlikely to reduce his transport costs and so he decided to abandon the project.

To be continued…..

To read more of John Simkin’s excellent essays, please visit:
http://spartacus-educational.com

Merthyr’s Bridges: Pont y Gwaith

Although Merthyr is world famous for its ironworks, most people don’t realise that there was an ironworks established in the Merthyr Valley as early as the late 16th Century. In 1583, Anthony Morley, an ironmaster from Sussex, set up a small ironworks on the western side of the River Taff between Merthyr Vale and Edwardsville.

The location had plentiful supplies of water for power and wood for charcoal, with iron ore readily available from surface deposits or shallow pits, but supplies and materials had to be transported over the river. To accommodate this, a wooden bridge was built and called Pont y Gwaith – literally Works’ Bridge. The small hamlet that built up around the ironworks took its name from the bridge.

The Pont y Gwaith Ironworks eventually closed, but the hamlet flourished, but by the early 19th Century, the Merthyr Tramroad, where Richard Trevithick ran the first locomotive on rails in 1804, had been constructed between Penydarren and Abercynon, bringing additional goods traffic to the area. The tramroad had a passing place on the east side of the river near Pont y Gwaith.

With the increase in traffic, the old wooden bridge wasn’t deemed suitable, so a replacement bridge was built. A new stone bridge was built in 1811 founded partly on bedrock and partly on squared masonry abutments. Its single arch spans 16.8m span, with a 4.8m rise. The slope of the approaches has been designed so that the curve of the parapet walls echoes the steep rise of the arch.

The bridge shares several design features with the longer-span William Edwards Bridge (Pontypridd, completed 1756), including the use of narrow stones to form the arch ring, the steep road gradient and a plan form that narrows from the abutments towards the midspan.

By the 1970’s mining subsidence had caused significant distortion resulting in the arch becoming pointed at midspan, so in 1979 the bridge was restored and a lightweight concrete saddle was used to strengthen the arch.

The bridge was awarded Grade II listed status in June 1988, and later became part of the Taff Trail from Cardiff Bay to Brecon. In 1989, it was closed to vehicles. In 1992-93, the bridge was repaired by Mid Glamorgan County Council and received a commendation from the Civic Trust.

Photos courtesy of Janice Lane.