We continue our serialisation of the memories of Merthyr in the 1830’s by an un-named correspondent to the Merthyr Express, courtesy of Michael Donovan.
Bidding goodbye to Plymouth, let us walk up to Penydarren, but to fall into line with what has been previously stated, now imagine ourselves at the old turnpike gate close to the Morlais Castle Inn. The road inclining to the right must now be followed.
After a short time the tramroad from the basin would be crossed, and only a few yards previously, the branch into the works would be seen. The gates, or rather the lower gates of the works are here, and passing through, the works would be virtually surrounding you, at least the rail shed, the brickyard, an the new mill, but persons other than hauliers with their horses etc. were not allowed in that way, so we must keep to the turnpike road for a short distance, having the tramway on the left, when another gate would be come to opposite the entrance to Penydarren Park.
Only a few yards further on the tramway again crosses the road, and over this very crossing the turnpike gate (the Penydarren gate) was hung. The gate house on the left was only recently removed by the District Council.
The clump of buildings on the right from the entrance gate to the works was agents or other employees residences, with the offices of the works in front of them. The tramroad kept to the right, and did not rise as fast as the turnpike road. There were no houses on the right-hand side of the road until the tramroad from the Morlais Limestone Quarries had been crossed.
The first come to was occupied by Mr Morgan, the blast furnace manager, but there were some cottages on the left before coming to the tramroad. There was a brick cistern near the crossing that was made for the use of the locomotives at work on the lower, or basin road, and upon one occasion, while being filled, the boiler exploded.
Before proceeding further, let us glance at the prospect on the right. Immediately in front were the blast furnaces, five in a row and one detached, a little to the right; but before reaching them the Morlais Brook, or dingle in which it ran, would be seen, then a long incline leading up on the left. This was used for the removal of cinders or other refuse, no doubt, after the tip on the riverside had become as large as could well be. On the other side of the incline were the blast furnaces, with a large spherical wrought-iron regulator for the blast between the engine houses.
To the left of the furnace yard are, or were, the hitting shops; to the right, after the blast furnaces, was the refinery, the the smiths shop, a self-acting incline to lower coal forge and mill use; then the rod lathe, the forge (or puddling forge) followed these mills where bars, sheets and slit rods were made. The rail mill was the lowest, and the sheds extended to the gates at the bottom of the works.
To be continued at a later date……